bitkeeper revision 1.1149.2.3 (411386bfYp4SwvBgrsGPfuJ_1XU5xw)

Enable pcibios_scan_all_fns since otherwise we don't find all multifunction devices.

diff --git a/.rootkeys b/.rootkeys
index 37439eac287fa736aa3302f5501c5767941300df..41716c69361e8b31214b24ea60dbfc37e2dcf18a 100644 (file)
--- a/.rootkeys
+++ b/.rootkeys
@@ -217,6 +217,7 @@
 40f5623aFTyFTR-vdiA-KaGxk5JOKQ linux-2.6.7-xen-sparse/include/asm-xen/asm-i386/msr.h
 40f5623adgjZq9nAgCt0IXdWl7udSA linux-2.6.7-xen-sparse/include/asm-xen/asm-i386/page.h
 40f5623a54NuG-7qHihGYmw4wWQnMA linux-2.6.7-xen-sparse/include/asm-xen/asm-i386/param.h
+41137cc1kkvg0cg7uxddcEfjL7L67w linux-2.6.7-xen-sparse/include/asm-xen/asm-i386/pci.h
 40f5623atCokYc2uCysSJ8jFO8TEsw linux-2.6.7-xen-sparse/include/asm-xen/asm-i386/pgalloc.h
 40f5623aEToIXouJgO-ao5d5pcEt1w linux-2.6.7-xen-sparse/include/asm-xen/asm-i386/pgtable-2level.h
 40f5623aCCXRPlGpNthVXstGz9ZV3A linux-2.6.7-xen-sparse/include/asm-xen/asm-i386/pgtable.h

diff --git a/linux-2.6.7-xen-sparse/include/asm-xen/asm-i386/pci.h b/linux-2.6.7-xen-sparse/include/asm-xen/asm-i386/pci.h
new file mode 100644 (file)
index 0000000..32d08ad
--- /dev/null
+++ b/linux-2.6.7-xen-sparse/include/asm-xen/asm-i386/pci.h
@@ -0,0 +1,117 @@
+#ifndef __i386_PCI_H
+#define __i386_PCI_H
+
+#include <linux/config.h>
+
+#ifdef __KERNEL__
+#include <linux/mm.h>          /* for struct page */
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+extern unsigned int pcibios_assign_all_busses(void);
+#else
+#define pcibios_assign_all_busses()    0
+#endif
+#define pcibios_scan_all_fns(a, b)     0
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO         0x1000
+#define PCIBIOS_MIN_MEM                (pci_mem_start)
+
+#define PCIBIOS_MIN_CARDBUS_IO 0x4000
+
+void pcibios_config_init(void);
+struct pci_bus * pcibios_scan_root(int bus);
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq);
+struct irq_routing_table *pcibios_get_irq_routing_table(void);
+int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS    (1)
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)         (0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)        do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)           (0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)  do { } while (0)
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask)   (1)
+
+static inline dma64_addr_t
+pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
+{
+       return ((dma64_addr_t) page_to_phys(page) +
+               (dma64_addr_t) offset);
+}
+
+static inline struct page *
+pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
+{
+       return pfn_to_page(dma_addr >> PAGE_SHIFT);
+}
+
+static inline unsigned long
+pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
+{
+       return (dma_addr & ~PAGE_MASK);
+}
+
+static inline void
+pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
+{
+}
+
+static inline void
+pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
+{
+       flush_write_buffers();
+}
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                              enum pci_mmap_state mmap_state, int write_combine);
+
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+/* On Xen we have to scan all functions since Xen hides bridges from
+ * us.  If a bridge is at fn=0 and that slot has a multifunction
+ * device, we won't find the additional devices without scanning all
+ * functions. */
+#undef pcibios_scan_all_fns
+#define pcibios_scan_all_fns(a, b)     1
+
+#endif /* __i386_PCI_H */

diff --git a/xen/common/physdev.c b/xen/common/physdev.c
index e76b72b56f9aa76fb791048e616bff597ecd9b1f..41218753eed6882678b91ae9de85410a372c4acf 100644 (file)
--- a/xen/common/physdev.c
+++ b/xen/common/physdev.c
@@ -734,7 +734,19 @@ void physdev_init_dom0(struct domain *p)
             continue;
         }
 
-        /* Skip bridges and other peculiarities for now. */
+        /* Skip bridges and other peculiarities for now.
+         *
+         * Note that this can prevent the guest from detecting devices
+         * with fn>0 on slots where the fn=0 device is a bridge.  We
+         * can identify such slots by looking at the multifunction bit
+         * (top bit of hdr_type, masked out in dev->hdr_type).
+         *
+         * In Linux2.4 we find all devices because the detection code
+         * scans all functions if the read of the fn=0 device's header
+         * type fails.
+         *
+         * In Linux2.6 we set pcibios_scan_all_fns().
+         */
         if ( dev->hdr_type != PCI_HEADER_TYPE_NORMAL )
             continue;
         pdev = xmalloc(sizeof(phys_dev_t));